Edgecore Networks

The AGR400 is engineered with the latest Broadcom StrataDNX™ Qumran2C silicon that targets use cases including OpenBNG, 100GbE aggregation router, PE router, or data center TOR switch/router.

The ECPO-BA and ECPO-PA modules are hot-pluggable Erbium Doped Fiber Amplifiers (EDFAs) in a standard QSFP28 package.

The ECPO-MDM4 is Edgecore's ultra compact, cable-type DWDM Mux/Demux designed for packet-optical DWDM applications that completely removes the need for an external Mux/Demux chassis.

The CSP-7550 is a combination server-switch hardware appliance based on 8- or 16-core Intel® Xeon® processors. The switch system includes 32 QSFP28 (100 GbE) network ports based on a P4 programmable Intel Tofino chipset, all contained within a single 2RU chassis form-factor.

Spine Switch for High-performance Data Center - 64 x 400G QSFP56-DD switch ports with Tomahawk 4.

The Edgecore DCS800 switch is a Top-of-Rack (TOR) or spine switch for high-performance data centers. In a 1RU (DCS800) form factor, the switch provides line-rate L2 and L3 switching across the 32 x QSFP28 ports, supporting up to 32 x 25/40/50/100 GbE connections.

COR550 is a high performance 100GbE disaggregated core router designed with Broadcom StrataDNX Jericho2 silicon and consists of fixed 40 x 100GE QSFP28 Network Interfaces (NIF) plus 13 x 400GE QSFP-DD Fabric Interfaces (FIF) in a 2RU form factor.

The Edgecore COR580 is a high-performance fabric switch for carrier, data center, or transport networking applications. The switch is a 1RU form factor with Broadcom StrataDNX family SoC silicon and consists of 24 x 400GE QSFP-DD Fabric Interfaces (FIF).

The Edgecore DCS240 is a top of rack or spine switch for high-performance data centers.

The ET7502-DAC-xM is a 1~2.5 m short passive copper direct attach cable with one QSFP-DD to one QSFP-DD 400G connectors.

Edgecore's QSFP-DD SR8 transceiver module is designed for 400 Gigabit Ethernet links over 100m OM4 multimode fiber.

The ASXvOLT16 is a 16-10G-port XGS-PON virtual Optical Line Terminal (vOLT) with 4 x 100G/40G QSFP28 fixed ports. The 10G ports, 100G uplink ports, and console/management USB ports are all on the front panel.

The Edgecore CSR300 is an open cell site gateway platform that features a combination of 1/10 Gbps, 25 Gbps, and 100 Gbps interfaces with optimized performance by utilizing merchant silicon, and standard x86 processor for access and aggregation networks.

The Edgecore EPS203 is a high-performance Multi-Gigabit Ethernet L2/L3 switch featuring 54 ports.

The ET7402-LR4 QSFP28 transceiver module is designed for 100 Gigabit Ethernet over single mode fiber.

​The ECPO-QDDZR400G is a 400Gbps tunable dense wavelength division multiplexing (DWDM) DP-16QAM coherent transceiver. The QSFP-DD form factor device is hot pluggable and includes digital diagnostics monitoring (DDM) and control functions.

Edgecore's ET5402-ZR-DW transceiver module is designed for C-band DWDM 10G Ethernet links over 80km single mode fiber.

The Edgecore DCS810 switch is a programmable leaf or spine switch for large scale data centers. In a 1RU form factor, the switch provides line-rate L2 switching and L3 routing, deep packet inspection, and traffic load balancing etc, across the 32 x QSFP-DD ports that support up to 32 x 400 GbE connections.

Edgecore CSR440 is an open disaggregated cell site gateway platform that provides a combination of 1/10/25Gbps, 50/100Gbps, and 100/400Gbps interfaces, utilizing a powerful Qumran family merchant silicon